2½" Routeless ShutterBlinds

The “ultimate wood blind”, the 2 1/2” ROUTELESS WOOD SHUTTERBLIND gives you the openness, richness and beauty of a shutter at a fraction of the cost. “No holes” in the slats improve privacy and reduce the amount of light in the room. When you see them in your room the quality craftsmanship of the durable 100% kiln dried basswood is obvious.

Colors

#100 Bright White

#100
Bright White

#101 Pure White

#101
Pure White

#102 Bone

#102
Bone

#103 Antique White

#103
Antique White

#108 Light Oak

#108
Light Oak

#109 Sugar Maple

#109
Sugar Maple

#110 Golden Oak

#110
Golden Oak

#111 Pecan

#111
Pecan

#117 Mahogany

#117
Mahogany

KC Blinds.com offers up 10 color samples per customer. If you need more than 10 we charge $1.00 per sample.

Specifications

  • Made from 100% kiln dried Basswood. Visible variations in color, grain, and texture are natural characteristics
  • Available in 4 White Colors and 5 Stain Colors
  • Slats are flat with a smooth finish.
  • Slats, valance, bottomrail, cord tassels, and plugs are color coordinated to match
  • Available with normal routed construction or with unique routeless construction that minimizes light and ensures privacy
  • Routeless Construction has no route holes in the slats, lift cords are attached to the string ladders. Top 2 slats are notched in the front and back of the slats at each ladder position. All other slats are notched in the back at each ladder position
  • 3” Valance is included at no extra charge
  • Minimum width for single blind is 8” net width. Blinds made with a net width less than 9.5" are subject to a surcharge and are not covered by our warranty
  • Maximum width for single blind is 96” net width
  • Mounting hardware is included. Mounting brackets are hinged, open boxes that can mount from the side, top or back of the window. Hold downs, spacer blocks and extensions brackets are included upon request. Because the headrail is 2" and the slats are 2.5", spacer blocks must be used on an outside mount blind to allow the slats to hang straight. Inside mount blinds should be hung approximately 3/8" away from the back of the window depth
  • Inside mount blinds – headrail and slats made 0.5” smaller than width ordered
  • Outside mount blinds – headrail and slats made to exact width ordered
  • Standard 2” x 2” headrail only
  • Standard IB valance is 0.375” larger than the headrail or 0.125” less than the ordered width of an IB blind
  • The face of a standard OB valance will be 1.5” larger than the headrail width. Returns will be 3.25”, mitre-cut and glued to the face of the valance. All valance measurements are from the widest point on the face of the valance
  • Wand tilter is not available on blinds with a net width over 9"
  • Cord tilter is a drum type, helical gear driven by a worm enclosed casing. Wand tilter only for blinds with a net width of 9" or less
  • Tapes drums are heavy duty nylon plastic
  • Tilt rod is solid steel with a corrosion-resistant finish
  • Lift Cord is polyester. Ladder, tapes, and cord designed to meet or exceed commercial item specification No. 1029-86
  • Cord and End Lock is steel with zinc coating

Options & Upgrades

  • Single blinds are available from 8” to 96” wide and up to 126” long
  • Also available as 2 or 3 blinds on 1 headrail up to 120” wide
  • Includes 3” Sculpted Wood Valance
  • Available with cord tilter
  • Motorized Tilt Kit
  • Remote Control
2.5inch Routeless Wood Shutterblinds