2½" Faux Wood ShutterBlinds - Routeless

Colors

#4000
Bright White

#4001
Pure White

#4002
Bone

#4003
Antique White

KC Blinds.com offers up 10 color samples per customer. If you need more than 10 we charge $1.00 per sample.

Specifications

• Synthetic Wood components are made of a composite of Basswood and PVC with UV Protection
• ShutterBlinds are not flame retardant
• Slats have a unique shape that is thicker in the center of the slats than at the edges
• All synthetic wood components are color coordinated to match with unfinished ends
• Slats, valance, bottomrail, cord tassels, and plugs are color coordinated to match
• Weigh approximately 70% more than the Basswood ShutterBlinds
• Routeless Construction has no route holes in the slats, lift cords are attached to the string ladders. Top 2 slats are notched in the front and back of the slats at each ladder position. All other slats are notched in the back at each ladder position
• 3” Valance is included at no extra charge
• Minimum width for single blind is 8” net width.  Blinds made with a net width less than 9.5" are subject to a surcharge and are not covered by our warranty
• Maximum width for single blind is 96” net width
• Mounting hardware is included. Mounting brackets are hinged, open boxes that can mount from the side, top or back of the window. Hold downs, spacer blocks and extensions brackets are included upon request.  Because the headrail is 2" and the slats are 2.5", spacer blocks must be used on an outside mount blind to allow the slats to hang straight. Inside mount blinds should be hung approximately 3/8" away from the back of the window depth
• Inside mount blinds – headrail and slats made 0.5” smaller than width ordered
• Outside mount blinds – headrail and slats made to exact width ordered
• Standard 2” x 2” headrail only
• Standard IB valance is 0.375” larger than the headrail or 0.125” less than the ordered width of an IB blind
• The face of a standard OB valance will be 1.625” larger than the headrail width. Returns will be 3.25”, mitre-cut and glued to the face of the valance. All valance measurements are from the widest point on the face of the valance
• Wand tilter is not available on blinds with a net width over 9"
• Cord tilter is a drum type, helical gear driven by a worm enclosed casing.  Wand tilter only for blinds with a net width of 9" or less
• Tapes drums are heavy duty nylon plastic
• Tilt rod is solid steel with a corrosion-resistant finish
• Lift Cord is polyester. Ladder, tapes, and cord designed to meet or exceed commercial item specification No. 1029-86
• Cord and End Lock is steel with zinc coating

Options & Upgrades

• Single blinds are available from 8” to 96” wide and up to 126” long
• Also available as 2 or 3 blinds on 1 headrail up to 120” wide
• Includes 3” Sculpted Wood Valance
• Available with wand or cord tilter