Measuring Instructions

Measuring for your blinds and shades is a simple, but critical part of decorating your windows.

Tips:

• Be sure to use a metal measuring tape.
• Measure every window, even if they look the same size.
• Do not take deductions for an inside mount, because the factory takes deductions. Outside mount blinds are made the size that you order, no deductions.
• Round all measurement off to the nearest 1/8 inch.
• Always check for obstructions, such as cranks, locks and alarm sensors, that could interfere with the installation or operation of your blinds

Inside vs outside mount:

• Most people prefer an inside mount blind if the window has enough depth.
• Consult the depth chart.

For inside mount:

• Measure the width (side to side) of the window opening at the top, middle and bottom and give us the smallest measurement.
• Measure the length (up and down) of the window opening on the left, middle and right and give us the smallest measurement.

For outside mount:

With trim

• Measure the width (side to side) of the window including the trim at the top, middle and bottom and give us the smallest measurement.
• Measure the length (up and down) of the window including the trim on the left, middle and  right and give us the smallest measurement.
• If you have a window sill and want the blind to stop at the sill measure from the top of the trim down to the sill.

Without trim

• Measure the window opening as per the “inside mount” instructions above and add 4-5” for the width and the length to give you privacy.  Remember to watch out for walls, handles or any other obstruction.
• At kcblinds.com our goal is to help you obtain the perfect window treatment, whether you are interested in beauty, light control, privacy or security. Call us at 1-866-948-6886 if we can help.